Trigger Sprayer Factory introduces the coloring process of cosmetic packaging:
1. Anodized aluminum: The aluminum exterior is wrapped on the inner plastic layer.
2. Electroplating (UV): Compared with the spray image, the effect is bright.
3. Spraying: Compared with electroplating, the color is dull and matte; frosting: a layer of frosted texture; inner bottle and outer spray: spraying on the outside of the inner bottle. There is a clear gap between the outer bottle and the outer bottle. interval. From the side, the area of the spray image is small; the spray inside the outer bottle: the spray painting is performed on the inner side of the outer bottle, which looks larger from the outside. The area is smaller in the vertical plane. And there is no gap with the inner bottle.
4. Brushed gold and silver: It is actually a film. If you look carefully, you can find the connection gap on the bottle.
5. Secondary oxidation: secondary oxidation is performed on the original oxide layer, so as to achieve a pattern covered with a matte surface on the smooth surface or a pattern with a smooth surface on the matte surface. Mostly used for logo production.
6. Injection molding color: Toner is added to the raw material when the product is injection molded. The craft is relatively cheap. You can also add pearl powder, or add too white powder to make the PET transparent color become opaque (add some toner to color).
Through the above introduction, Mini Trigger Sprayer Manufacturers hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com/
1. Anodized aluminum: The aluminum exterior is wrapped on the inner plastic layer.
2. Electroplating (UV): Compared with the spray image, the effect is bright.
3. Spraying: Compared with electroplating, the color is dull and matte; frosting: a layer of frosted texture; inner bottle and outer spray: spraying on the outside of the inner bottle. There is a clear gap between the outer bottle and the outer bottle. interval. From the side, the area of the spray image is small; the spray inside the outer bottle: the spray painting is performed on the inner side of the outer bottle, which looks larger from the outside. The area is smaller in the vertical plane. And there is no gap with the inner bottle.
4. Brushed gold and silver: It is actually a film. If you look carefully, you can find the connection gap on the bottle.
5. Secondary oxidation: secondary oxidation is performed on the original oxide layer, so as to achieve a pattern covered with a matte surface on the smooth surface or a pattern with a smooth surface on the matte surface. Mostly used for logo production.
6. Injection molding color: Toner is added to the raw material when the product is injection molded. The craft is relatively cheap. You can also add pearl powder, or add too white powder to make the PET transparent color become opaque (add some toner to color).
Through the above introduction, Mini Trigger Sprayer Manufacturers hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com/
In daily life, many families develop good habits. That is, every time the plastic bottles left over from drinking are collected and sold as waste, it is environmentally friendly and saves money. So, do you know why most people remove the cap when selling plastic bottles? In fact, plastic bottle caps can be used for many times. They are useful at home, economical, affordable, and practical. Next, Plastic Press Cap Factory introduces the magic method of plastic bottle caps:
1. Prevent the garbage bag from falling out. Because our house has trash cans, I have noticed that the trash bags fall in the trash can when I throw out the trash. If you continue to throw trash inside, the trash bag will be buried, and then it will be very difficult to clean up, and the inner wall of the trash can will be stained. To solve this problem, first prepare two plastic caps. It is also okay to cut the side edge of the plastic bottle cap in half with a rice cutter. Finally, apply a little glue on the plastic bottle cap and stick it on both sides of the trash can. When we put the garbage bags, we only need to put the portable part of the garbage bag through the plastic bottle cap to prevent the garbage bag from being misplaced and falling off the bottle cap, which solves the big troubles of many families.
2. Repair the damaged charging cable. If you have a mobile phone, the outer shell of the original charging cable of the mobile phone should have fallen off. Especially the positions of both ends of the charging cable. So, what should I do if I encounter such a problem? Teach you a trick, a plastic bottle cap is easy to repair. No matter how you bend it, it won’t break. First use a lighter to burn the plastic bottle cap and melt at high temperature. Then, roll the part of the cell phone charging cable cover that fell off on the melted plastic bottle cap, and cover the charging cable cover with plastic. In this way, the mobile phone charger will not be damaged no matter how it is bent, and it is cheap and practical at no cost.
3. Protect the plug. Home appliances are indispensable daily necessities in every family, so the configuration of the plugs of home appliances is particularly important. Don’t know how to store electrical plugs? Let me teach you a trick. Cut off the plastic bottle cap several times, and change the plug every second to store the artifact. First prepare the plastic bottle cap. Use a knife to cut the center of the plastic cover into two small holes, the size of which can be inserted into the power strip. Finally, apply a little hot melt glue on the plastic bottle cap and stick it next to the socket. When not using home appliances, just pull out the plug and hang it on the plastic bottle cap. It not only protects the plug and extends its life, but also prevents the plug from contacting water, which solves the troubles of many families.
4. Self-made funnel. In life, it is possible to put things in bottles and jars. But the mouth of this bottle is too small, and a funnel needs to be borrowed. What should we do now? At this time, plastic hats are very useful. First prepare the plastic bottle cap, and burn the middle part of the plastic bottle cap with a lighter. After half-baking the cap, use chopsticks to slowly take it out from the inside of the cap, and use scissors to make a small hole in the head. Next, prepare the plastic bottle, cut it in half, and close the lid. This simple and practical self-made funnel is completed. When you need to fill the bottle, you just need to insert the self-made funnel into the bottle and it will not overflow smoothly.
5. Homemade moisture-proof artifact. What should I do if I have food that must be sealed and stored at home, but there is no moisture-proof tool? In fact, a plastic bottle cap can easily solve such a problem. First prepare the plastic bottle and use scissors to divide the plastic bottle into two parts. It is only necessary to pass the carrying part of the plastic food bag that needs to be sealed from the inside to the outside of the bottle head of the plastic bottle. Finally, closing the lid of the plastic bottle can seal the food quickly and easily, which solves the troubles of many families.
Through the above introduction, Fine Mist Sprayer Pump Factory hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com
1. Prevent the garbage bag from falling out. Because our house has trash cans, I have noticed that the trash bags fall in the trash can when I throw out the trash. If you continue to throw trash inside, the trash bag will be buried, and then it will be very difficult to clean up, and the inner wall of the trash can will be stained. To solve this problem, first prepare two plastic caps. It is also okay to cut the side edge of the plastic bottle cap in half with a rice cutter. Finally, apply a little glue on the plastic bottle cap and stick it on both sides of the trash can. When we put the garbage bags, we only need to put the portable part of the garbage bag through the plastic bottle cap to prevent the garbage bag from being misplaced and falling off the bottle cap, which solves the big troubles of many families.
2. Repair the damaged charging cable. If you have a mobile phone, the outer shell of the original charging cable of the mobile phone should have fallen off. Especially the positions of both ends of the charging cable. So, what should I do if I encounter such a problem? Teach you a trick, a plastic bottle cap is easy to repair. No matter how you bend it, it won’t break. First use a lighter to burn the plastic bottle cap and melt at high temperature. Then, roll the part of the cell phone charging cable cover that fell off on the melted plastic bottle cap, and cover the charging cable cover with plastic. In this way, the mobile phone charger will not be damaged no matter how it is bent, and it is cheap and practical at no cost.
3. Protect the plug. Home appliances are indispensable daily necessities in every family, so the configuration of the plugs of home appliances is particularly important. Don’t know how to store electrical plugs? Let me teach you a trick. Cut off the plastic bottle cap several times, and change the plug every second to store the artifact. First prepare the plastic bottle cap. Use a knife to cut the center of the plastic cover into two small holes, the size of which can be inserted into the power strip. Finally, apply a little hot melt glue on the plastic bottle cap and stick it next to the socket. When not using home appliances, just pull out the plug and hang it on the plastic bottle cap. It not only protects the plug and extends its life, but also prevents the plug from contacting water, which solves the troubles of many families.
4. Self-made funnel. In life, it is possible to put things in bottles and jars. But the mouth of this bottle is too small, and a funnel needs to be borrowed. What should we do now? At this time, plastic hats are very useful. First prepare the plastic bottle cap, and burn the middle part of the plastic bottle cap with a lighter. After half-baking the cap, use chopsticks to slowly take it out from the inside of the cap, and use scissors to make a small hole in the head. Next, prepare the plastic bottle, cut it in half, and close the lid. This simple and practical self-made funnel is completed. When you need to fill the bottle, you just need to insert the self-made funnel into the bottle and it will not overflow smoothly.
5. Homemade moisture-proof artifact. What should I do if I have food that must be sealed and stored at home, but there is no moisture-proof tool? In fact, a plastic bottle cap can easily solve such a problem. First prepare the plastic bottle and use scissors to divide the plastic bottle into two parts. It is only necessary to pass the carrying part of the plastic food bag that needs to be sealed from the inside to the outside of the bottle head of the plastic bottle. Finally, closing the lid of the plastic bottle can seal the food quickly and easily, which solves the troubles of many families.
Through the above introduction, Fine Mist Sprayer Pump Factory hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com
Cosmetic Lotion Pump Suppliers introduces the classification of cosmetic packaging materials:
1. The material of plastic bottle is usually PP, PE, K material, AS, ABS, acrylic, PET, PETG, PETE, etc.
2. Generally used in cosmetics containers with thicker walls, cream bottles, caps, stoppers, gaskets, pump heads, dust covers are injection molding; PET blow molding is two-step molding, tube embryo is injection molding, and the finished product is packaged For blowing. Others, such as lotion bottles and washing bottles with thin container walls, are blown bottles.
3. The PET material is an environmentally friendly material with high barrier properties, light weight, non-breaking characteristics, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent, and it is widely used in gel water. The bottle mouth is generally standard 16#, 18#, 22#, 24# caliber, which can be used with a pump head.
4. Acrylic is made of injection-molded bottle, which has poor chemical resistance. Generally, it cannot be directly filled with paste. It needs to be blocked by an inner liner. The filling is not easy to be too full to prevent the paste from entering between the liner and the acrylic bottle to avoid cracks. , Packaging requirements are high during transportation, it looks particularly obvious after scratches, has high permeability, and the sensory upper wall is extraordinarily thick, but the price is quite expensive.
5. AS, ABS: AS has better transparency and toughness than ABS.
6. Mold development costs: blowing molds are 1,500 yuan-4,000 yuan, injection molds are 8,000 yuan-20,000 yuan, molds made of stainless steel are more expensive than alloy materials, but they are durable. Several molds are produced at a time. The production volume needs, if the production volume is large, you can choose a mold with four or six molds, and the customer can decide by himself.
Through the above introduction, Foaming Pump Head Wholesalers hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com
1. The material of plastic bottle is usually PP, PE, K material, AS, ABS, acrylic, PET, PETG, PETE, etc.
2. Generally used in cosmetics containers with thicker walls, cream bottles, caps, stoppers, gaskets, pump heads, dust covers are injection molding; PET blow molding is two-step molding, tube embryo is injection molding, and the finished product is packaged For blowing. Others, such as lotion bottles and washing bottles with thin container walls, are blown bottles.
3. The PET material is an environmentally friendly material with high barrier properties, light weight, non-breaking characteristics, chemical resistance, and strong transparency. It can be made into pearlescent, colored, magnetic white, and transparent, and it is widely used in gel water. The bottle mouth is generally standard 16#, 18#, 22#, 24# caliber, which can be used with a pump head.
4. Acrylic is made of injection-molded bottle, which has poor chemical resistance. Generally, it cannot be directly filled with paste. It needs to be blocked by an inner liner. The filling is not easy to be too full to prevent the paste from entering between the liner and the acrylic bottle to avoid cracks. , Packaging requirements are high during transportation, it looks particularly obvious after scratches, has high permeability, and the sensory upper wall is extraordinarily thick, but the price is quite expensive.
5. AS, ABS: AS has better transparency and toughness than ABS.
6. Mold development costs: blowing molds are 1,500 yuan-4,000 yuan, injection molds are 8,000 yuan-20,000 yuan, molds made of stainless steel are more expensive than alloy materials, but they are durable. Several molds are produced at a time. The production volume needs, if the production volume is large, you can choose a mold with four or six molds, and the customer can decide by himself.
Through the above introduction, Foaming Pump Head Wholesalers hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com
The bottle used to pack cosmetic lotion is called lotion bottle. Lotion bottle packaging is a very important classification in cosmetic packaging. Good lotion bottle packaging must meet at least a few points. The first is to facilitate squeezing and pouring. Because the emulsion is sticky, it is not easy to pour it out. The second is that the packaging of lotion bottles requires aesthetics, which is the overall trend of the entire cosmetics packaging. The third is that the design of the lotion bottle packaging is also crucial.
Trigger Sprayer Manufacturers introduced several suggestions for the purchase of lotion bottle packaging. First of all, it depends on the style of the lotion bottle packaging, whether it is beautiful and reasonable in design. Secondly, look at the material of the emulsion packaging, including glass, acrylic, and plastic, and choose according to product positioning. Again, compared to the price, whether the lotion bottle manufacturer’s quotation is reasonable.
Through the above introduction, Cosmetic Lotion Pump Manufacturers hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com
Trigger Sprayer Manufacturers introduced several suggestions for the purchase of lotion bottle packaging. First of all, it depends on the style of the lotion bottle packaging, whether it is beautiful and reasonable in design. Secondly, look at the material of the emulsion packaging, including glass, acrylic, and plastic, and choose according to product positioning. Again, compared to the price, whether the lotion bottle manufacturer’s quotation is reasonable.
Through the above introduction, Cosmetic Lotion Pump Manufacturers hopes that you can simply refer to the content of this article in future use.
https://www.kerrysprayer.com
Square Head Trigger Sprayer Suppliers
2021年11月3日Square Head Trigger Sprayer Suppliers introduces the testing standards for cosmetic packaging materials
1. The barrier performance test of cosmetic packaging materials. This mainly examines the barrier effect of cosmetic packaging materials such as eye cream hoses and cleanser packaging on gas, liquid and other objects with permeability properties. It is an important factor affecting product quality. . If its barrier properties are weak, leakage or other problems will occur, which will affect the quality of cosmetics. General technicians will check whether it meets national standards through gas permeability instruments and oxygen permeability instruments.
2. Strength testing, strong cosmetic packaging materials can save a lot of later troubles. Strength testing includes the tensile strength, tear strength, puncture resistance, etc. of cosmetic packaging materials such as eye cream hoses and cleanser packaging. The tensile strength is the value of the tensile force it can withstand; the peel strength is also a point that needs to be tested, mainly refers to the adhesion between the packaging material layer and the layer, if it is too low, the cosmetics will leak; the puncture resistance means that the cosmetic packaging If there is a hard object, whether there will be a puncture phenomenon.
3. Tightness test. Everyone knows that if the cosmetics expire and change in quality, it will have a serious impact on our skin. For this factor of cosmetic packaging such as eye cream hoses and cleanser packaging, we can use vacuum to test this factor Whether its airtightness passes the test, it can also be operated fully automatically through the computer control panel.
4. The impact resistance of cosmetic packaging. During transportation, this indicator can ensure that the cosmetics are delivered to consumers intact. There are two test methods, which are dart impact and pendulum impact. The former is to measure the impact quality and energy value of the packaging material; the latter is to judge the energy consumed by the punch at a certain speed.
The above content is organized and shared by Square Head Trigger Sprayer Manufacturers, hoping to help those in need.
https://www.kerrysprayer.com/product/trigger-sprayer/
1. The barrier performance test of cosmetic packaging materials. This mainly examines the barrier effect of cosmetic packaging materials such as eye cream hoses and cleanser packaging on gas, liquid and other objects with permeability properties. It is an important factor affecting product quality. . If its barrier properties are weak, leakage or other problems will occur, which will affect the quality of cosmetics. General technicians will check whether it meets national standards through gas permeability instruments and oxygen permeability instruments.
2. Strength testing, strong cosmetic packaging materials can save a lot of later troubles. Strength testing includes the tensile strength, tear strength, puncture resistance, etc. of cosmetic packaging materials such as eye cream hoses and cleanser packaging. The tensile strength is the value of the tensile force it can withstand; the peel strength is also a point that needs to be tested, mainly refers to the adhesion between the packaging material layer and the layer, if it is too low, the cosmetics will leak; the puncture resistance means that the cosmetic packaging If there is a hard object, whether there will be a puncture phenomenon.
3. Tightness test. Everyone knows that if the cosmetics expire and change in quality, it will have a serious impact on our skin. For this factor of cosmetic packaging such as eye cream hoses and cleanser packaging, we can use vacuum to test this factor Whether its airtightness passes the test, it can also be operated fully automatically through the computer control panel.
4. The impact resistance of cosmetic packaging. During transportation, this indicator can ensure that the cosmetics are delivered to consumers intact. There are two test methods, which are dart impact and pendulum impact. The former is to measure the impact quality and energy value of the packaging material; the latter is to judge the energy consumed by the punch at a certain speed.
The above content is organized and shared by Square Head Trigger Sprayer Manufacturers, hoping to help those in need.
https://www.kerrysprayer.com/product/trigger-sprayer/
Square Head Trigger Sprayer Suppliers
2021年11月3日Square Head Trigger Sprayer Suppliers introduces the testing standards for cosmetic packaging materials
1. The barrier performance test of cosmetic packaging materials. This mainly examines the barrier effect of cosmetic packaging materials such as eye cream hoses and cleanser packaging on gas, liquid and other objects with permeability properties. It is an important factor affecting product quality. . If its barrier properties are weak, leakage or other problems will occur, which will affect the quality of cosmetics. General technicians will check whether it meets national standards through gas permeability instruments and oxygen permeability instruments.
2. Strength testing, strong cosmetic packaging materials can save a lot of later troubles. Strength testing includes the tensile strength, tear strength, puncture resistance, etc. of cosmetic packaging materials such as eye cream hoses and cleanser packaging. The tensile strength is the value of the tensile force it can withstand; the peel strength is also a point that needs to be tested, mainly refers to the adhesion between the packaging material layer and the layer, if it is too low, the cosmetics will leak; the puncture resistance means that the cosmetic packaging If there is a hard object, whether there will be a puncture phenomenon.
3. Tightness test. Everyone knows that if the cosmetics expire and change in quality, it will have a serious impact on our skin. For this factor of cosmetic packaging such as eye cream hoses and cleanser packaging, we can use vacuum to test this factor Whether its airtightness passes the test, it can also be operated fully automatically through the computer control panel.
4. The impact resistance of cosmetic packaging. During transportation, this indicator can ensure that the cosmetics are delivered to consumers intact. There are two test methods, which are dart impact and pendulum impact. The former is to measure the impact quality and energy value of the packaging material; the latter is to judge the energy consumed by the punch at a certain speed.
The above content is organized and shared by Square Head Trigger Sprayer Manufacturers, hoping to help those in need.
https://www.kerrysprayer.com/product/trigger-sprayer/
1. The barrier performance test of cosmetic packaging materials. This mainly examines the barrier effect of cosmetic packaging materials such as eye cream hoses and cleanser packaging on gas, liquid and other objects with permeability properties. It is an important factor affecting product quality. . If its barrier properties are weak, leakage or other problems will occur, which will affect the quality of cosmetics. General technicians will check whether it meets national standards through gas permeability instruments and oxygen permeability instruments.
2. Strength testing, strong cosmetic packaging materials can save a lot of later troubles. Strength testing includes the tensile strength, tear strength, puncture resistance, etc. of cosmetic packaging materials such as eye cream hoses and cleanser packaging. The tensile strength is the value of the tensile force it can withstand; the peel strength is also a point that needs to be tested, mainly refers to the adhesion between the packaging material layer and the layer, if it is too low, the cosmetics will leak; the puncture resistance means that the cosmetic packaging If there is a hard object, whether there will be a puncture phenomenon.
3. Tightness test. Everyone knows that if the cosmetics expire and change in quality, it will have a serious impact on our skin. For this factor of cosmetic packaging such as eye cream hoses and cleanser packaging, we can use vacuum to test this factor Whether its airtightness passes the test, it can also be operated fully automatically through the computer control panel.
4. The impact resistance of cosmetic packaging. During transportation, this indicator can ensure that the cosmetics are delivered to consumers intact. There are two test methods, which are dart impact and pendulum impact. The former is to measure the impact quality and energy value of the packaging material; the latter is to judge the energy consumed by the punch at a certain speed.
The above content is organized and shared by Square Head Trigger Sprayer Manufacturers, hoping to help those in need.
https://www.kerrysprayer.com/product/trigger-sprayer/
The Benefits Of The Glass Cosmetic Package
2021年10月28日The benefits of the Glass Cosmetic Package :
1. The glass bottle material is lead-free, harmless, and has good barrier properties. It can prevent various gases from oxidizing and corroding the contents in the bottle, and at the same time, it can effectively prevent the volatile components of the contents in the bottle from volatilizing into the atmosphere.
2. The glass bottle can be recycled and reused, which reduces the packaging cost of the enterprise.
3. Transparent glass bottles can easily reflect the color of the contents of the bottle. Glass bottle is a traditional beverage packaging container in my country, and a glass bottle is also a kind of packaging material with a long history. With the influx of a variety of packaging materials into the market, glass bottles still occupy an important position in beverage packaging, which is inseparable from its packaging characteristics and cannot be replaced by other packaging materials.
4. The glass bottle is safe and hygienic, non-toxic and harmless, and has good corrosion and acid resistance. They have special packaging advantages for the wine industry, dairy industry, edible oil industry, and beverage industry. They are particularly suitable for packaging acidic substances, such as vegetable beverages and edible vinegar.
1. The glass bottle material is lead-free, harmless, and has good barrier properties. It can prevent various gases from oxidizing and corroding the contents in the bottle, and at the same time, it can effectively prevent the volatile components of the contents in the bottle from volatilizing into the atmosphere.
2. The glass bottle can be recycled and reused, which reduces the packaging cost of the enterprise.
3. Transparent glass bottles can easily reflect the color of the contents of the bottle. Glass bottle is a traditional beverage packaging container in my country, and a glass bottle is also a kind of packaging material with a long history. With the influx of a variety of packaging materials into the market, glass bottles still occupy an important position in beverage packaging, which is inseparable from its packaging characteristics and cannot be replaced by other packaging materials.
4. The glass bottle is safe and hygienic, non-toxic and harmless, and has good corrosion and acid resistance. They have special packaging advantages for the wine industry, dairy industry, edible oil industry, and beverage industry. They are particularly suitable for packaging acidic substances, such as vegetable beverages and edible vinegar.
We knows that good things really do come in small packages, especially when we’re talking about our favorite 2oz bottle. We offers the perfect Cosmetic Cream Jar manufacturers packaging solution for companies looking to offer their best-selling products in a portable and compact size. These small bottles are perfect for busy consumers and their on-the-go lifestyles.
Our 2oz PET Boston round bottle is a great option for many reasons. Not only is it perfect for the on-the-go nature of today’s consumer, it can also be used for:
Health and beauty products
Ointments and oils
Product samples
Liquid “shots”
Each 2oz PET Boston round bottle is made of Polyethylene Terephthalate (PET) material, which makes the bottle completely recyclable, lightweight, and safe for children.
4 Top Uses for the 2oz Bottle
Travel Toiletry Kit Travel-sized bottles provide an excellent way to carry liquid products in suitcases and backpacks.
Trial Size: This 2oz bottle is an amazing showcase for consumers who want to sample your products. By offering a smaller size, consumers can make sound decisions to purchase a full-size item when ready. This is a great way for you to provide products that will ultimately increase your brand’s reach.
Travel Size: If you supply personal care items, such as shampoo, sunscreens, or contact lenses solution, there’s a great possibility consumers need travel sized options for their airport carry-ons. The 2oz bottle provides peace of mind by being an approved size for TSA and travels easily in toiletry bags. It’s also a great use for amenities supplied in hotel rooms.
“Shot” Market: Living in a fast-paced society, consumers are always looking for something to help them refuel. Beverage manufacturers can use this 2oz bottle as a perfectly sized shot to infuse energy quickly into consumers. A sleep shot is another perfect option and allows easy consumption for consumers who could use better sleep at night. Not to mention, these bottles easily fit into a purse or backpack.
Ointments and Oils: If your company produces ointments and oils, the 2oz bottle ensures your product will stay fresh for its duration of use. Its PET material offers a protective barrier, so oils maintain their integrity. Products containing diluted essential oils are also kept safe in this bottle.
No matter what industry, the 2oz bottle works perfectly with products, especially liquids, of all kinds.
We are a Plastic Press Cap for sale, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
Our 2oz PET Boston round bottle is a great option for many reasons. Not only is it perfect for the on-the-go nature of today’s consumer, it can also be used for:
Health and beauty products
Ointments and oils
Product samples
Liquid “shots”
Each 2oz PET Boston round bottle is made of Polyethylene Terephthalate (PET) material, which makes the bottle completely recyclable, lightweight, and safe for children.
4 Top Uses for the 2oz Bottle
Travel Toiletry Kit Travel-sized bottles provide an excellent way to carry liquid products in suitcases and backpacks.
Trial Size: This 2oz bottle is an amazing showcase for consumers who want to sample your products. By offering a smaller size, consumers can make sound decisions to purchase a full-size item when ready. This is a great way for you to provide products that will ultimately increase your brand’s reach.
Travel Size: If you supply personal care items, such as shampoo, sunscreens, or contact lenses solution, there’s a great possibility consumers need travel sized options for their airport carry-ons. The 2oz bottle provides peace of mind by being an approved size for TSA and travels easily in toiletry bags. It’s also a great use for amenities supplied in hotel rooms.
“Shot” Market: Living in a fast-paced society, consumers are always looking for something to help them refuel. Beverage manufacturers can use this 2oz bottle as a perfectly sized shot to infuse energy quickly into consumers. A sleep shot is another perfect option and allows easy consumption for consumers who could use better sleep at night. Not to mention, these bottles easily fit into a purse or backpack.
Ointments and Oils: If your company produces ointments and oils, the 2oz bottle ensures your product will stay fresh for its duration of use. Its PET material offers a protective barrier, so oils maintain their integrity. Products containing diluted essential oils are also kept safe in this bottle.
No matter what industry, the 2oz bottle works perfectly with products, especially liquids, of all kinds.
We are a Plastic Press Cap for sale, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
As ecommerce sales continue to rise, beauty industry manufacturers have to find ways to get their sample products in the hands of consumers. This allows the consumers to try before they invest in that full-size products or upscale brands.
Distributing sample size products is the most powerful way to entice new consumers into your brand and products.
WHY ARE BEAUTY SAMPLE SIZE PRODUCTS IMPORTANT?
Sampling is, and always has been, a persuasive tactic to introduce consumers to your brand. It’s important for consumers to test out beauty products for a number of reasons, including texture, fragrances, color, and individual skin sensitivities.
With sales excelling, e-commerce limits the opportunity to interact with the product yet luxury brands are often quite pricey. Therefore, it’s imperative that consumers have opportunities to test products. Popular beauty products widely provided as Lotion Dispenser Pump whloesales sizes are:
Perfumes
Lip Colors
Foundation
Moisturizers
Hair Care
And more!
Manufacturers should consider sampling when launching a new product, repositioning an existing product to a new consumer base, or enhancing the consumers’ experience with your product. The sample size products can also mimic the look of the full-size option.
Small Vials: This packaging option is commonly used for fragrance samples, but can be good for any liquid product. Vials are easily stored in purses and bag compartments for women and men on-the-go. With closures like rollers or screw caps, this sample size product can provide the right option for what you need.
Small Bottles: A small bottle, such as a 1/4 oz. HDPE cylinder can be paired with various dispensing closures. For example, the hair industry uses small bottles to provide sample and travel size options for consumers with either high curiosity or on-the-go lifestyles. Due to airport travel restrictions, manufacturers have a great way of allowing consumers to use their products as they travel.
Beauty Sample Ampoules are perfect to introduce potential consumers to your product by giving them a single use sample.
Ampoules: This packaging item comes in plastic and glass. Ampoules have been very popular within the pharmaceutical, cosmetic, and skin care industries. Offering a one-time use for liquids, lotions, creams, and serums, this packaging option provides the perfect solution for those who are particular about the expiration date of beauty products.
Beauty Sample Creams, like lotion or gels, are easily portable and perfect for sampling before the consumer purchases a full-size product.
Mini Jars: The 1/4 oz. It is an upscale way to sample a product that comes in a larger size. This jar gives the consumer the opportunity to try the product more than once. Products, like lotions, gels, and creams, are perfect options for filling and distributing to the interested consumers.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump for sale, please consult us if you have any questions.https://www.kerrysprayer.com
Distributing sample size products is the most powerful way to entice new consumers into your brand and products.
WHY ARE BEAUTY SAMPLE SIZE PRODUCTS IMPORTANT?
Sampling is, and always has been, a persuasive tactic to introduce consumers to your brand. It’s important for consumers to test out beauty products for a number of reasons, including texture, fragrances, color, and individual skin sensitivities.
With sales excelling, e-commerce limits the opportunity to interact with the product yet luxury brands are often quite pricey. Therefore, it’s imperative that consumers have opportunities to test products. Popular beauty products widely provided as Lotion Dispenser Pump whloesales sizes are:
Perfumes
Lip Colors
Foundation
Moisturizers
Hair Care
And more!
Manufacturers should consider sampling when launching a new product, repositioning an existing product to a new consumer base, or enhancing the consumers’ experience with your product. The sample size products can also mimic the look of the full-size option.
Small Vials: This packaging option is commonly used for fragrance samples, but can be good for any liquid product. Vials are easily stored in purses and bag compartments for women and men on-the-go. With closures like rollers or screw caps, this sample size product can provide the right option for what you need.
Small Bottles: A small bottle, such as a 1/4 oz. HDPE cylinder can be paired with various dispensing closures. For example, the hair industry uses small bottles to provide sample and travel size options for consumers with either high curiosity or on-the-go lifestyles. Due to airport travel restrictions, manufacturers have a great way of allowing consumers to use their products as they travel.
Beauty Sample Ampoules are perfect to introduce potential consumers to your product by giving them a single use sample.
Ampoules: This packaging item comes in plastic and glass. Ampoules have been very popular within the pharmaceutical, cosmetic, and skin care industries. Offering a one-time use for liquids, lotions, creams, and serums, this packaging option provides the perfect solution for those who are particular about the expiration date of beauty products.
Beauty Sample Creams, like lotion or gels, are easily portable and perfect for sampling before the consumer purchases a full-size product.
Mini Jars: The 1/4 oz. It is an upscale way to sample a product that comes in a larger size. This jar gives the consumer the opportunity to try the product more than once. Products, like lotions, gels, and creams, are perfect options for filling and distributing to the interested consumers.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump for sale, please consult us if you have any questions.https://www.kerrysprayer.com
The simple answer is yes, but if you’re looking to see if your current dispensers are suitable for hand sanitiser gel then you may need to check a few things first, as you could damage them in the long run or they may not work correctly. Read on so you don’t make that mistake.
There are models of Lotion Dispenser Pump whloesales that are made to house both liquid soap and alcohol based consumables, without the need to change any parts. So, the dispenser you have may already be equipped to deal with both. Some can only take liquid soap because the insides and valves are only suitable for this, as alcohol may damage the materials of certain dispensers. There are also ones that only take foaming soap.
However, some models of soap dispenser have different inner tanks but the same outer casing, meaning you can interchange the tanks and valves to suit various soaps. For example you may have a Cleanflow 1500ml Lever Operated Liquid Soap and Hydroalcoholic Gel Dispenser which can interchange between foam soap, liquid soap / alcohol gel or spray by changing just the insides and pumps, not having to change the full unit.
So, you have to be careful to make sure you have the right materials and valve in the unit so that it firstly will dispense the right soap / gel, but also won’t damage the unit in the long run.
So what should you look at for bulk soap dispensers that work with alcohol?
The valves and inner tanks should be resistant enough to work with alcohol as it is more corrosive than normal soap. The life time of the pump using normal soap will always be longer than using alcohol containing liquids and gels, but the pump should be resistant enough to increase the longevity of the unit.
If the inner tank is easily changeable you may only need to change it without the need to change the entire dispenser – saving you money in the long term. You will need to make sure you know the model of dispenser you have though so that you can match up the right internals.
The material of the tank should be made of plastics that are not degradable by any contact with alcohol.
This is just an ideal, but the tank should be provided with a (removable) lid, so that there is no chance of evaporation of the alcohol. This means you can take off the lid when you use liquid soap and put it back on with alcohol-based products.
If you are unsure if your current soap dispenser is suitable for hand sanitizer or alcohol gel then please do not hesitate to get in touch and we can see if we can advise you the best we can.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump for sale, please consult us if you have any questions.https://www.kerrysprayer.com
There are models of Lotion Dispenser Pump whloesales that are made to house both liquid soap and alcohol based consumables, without the need to change any parts. So, the dispenser you have may already be equipped to deal with both. Some can only take liquid soap because the insides and valves are only suitable for this, as alcohol may damage the materials of certain dispensers. There are also ones that only take foaming soap.
However, some models of soap dispenser have different inner tanks but the same outer casing, meaning you can interchange the tanks and valves to suit various soaps. For example you may have a Cleanflow 1500ml Lever Operated Liquid Soap and Hydroalcoholic Gel Dispenser which can interchange between foam soap, liquid soap / alcohol gel or spray by changing just the insides and pumps, not having to change the full unit.
So, you have to be careful to make sure you have the right materials and valve in the unit so that it firstly will dispense the right soap / gel, but also won’t damage the unit in the long run.
So what should you look at for bulk soap dispensers that work with alcohol?
The valves and inner tanks should be resistant enough to work with alcohol as it is more corrosive than normal soap. The life time of the pump using normal soap will always be longer than using alcohol containing liquids and gels, but the pump should be resistant enough to increase the longevity of the unit.
If the inner tank is easily changeable you may only need to change it without the need to change the entire dispenser – saving you money in the long term. You will need to make sure you know the model of dispenser you have though so that you can match up the right internals.
The material of the tank should be made of plastics that are not degradable by any contact with alcohol.
This is just an ideal, but the tank should be provided with a (removable) lid, so that there is no chance of evaporation of the alcohol. This means you can take off the lid when you use liquid soap and put it back on with alcohol-based products.
If you are unsure if your current soap dispenser is suitable for hand sanitizer or alcohol gel then please do not hesitate to get in touch and we can see if we can advise you the best we can.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump for sale, please consult us if you have any questions.https://www.kerrysprayer.com
WHAT IS FLUORINATION?
We’ve talked about fluorination in the past, but here’s a quick reminder: fluorination is the process of adding a chemical barrier to existing Cosmetic Cream Jar manufacturers. The process allows manufacturers to package liquid products in plastic containers that may otherwise negatively react with the chemicals in the products. Fluorination helps to prevent paneling, distortion, and other chemical reactions between the product and container.
WHAT IS FLUORINATION USED FOR?
Fluorination is often used for packaging that contains harsh contents like industrial chemicals, household cleaners, paint thinners, automotive products, and more. However, fluorination is also popular with packaging used to contain milder contents, like flavors and fragrances.
WHY FLUORINATE FLAVOR AND FRAGRANCE PACKAGING?
Although flavors and fragrances are less harsh than other products commonly associated with fluorination, these products require fluorinated containers for many reasons.
Fluorination for Flavor Packaging
Although artificial flavors aren’t considered “harsh chemicals,” it’s still important to keep the flavor away from plastics to avoid having a plastic taste in the finished food item. When a container that is being used to package flavors is fluorinated, it creates a barrier between the plastic and the flavor, helping it keep the flavor from embedding into the plastic or permeating into the plastic materials. Fluorinated packaging also helps the flavor to keep its potency longer in storage.
Most flavor products are stored in 5-gallon tight-head containers or in smaller, 1-gallon plastic containers. These packaging options can easily be fluorinated if they are made with HDPE, LDPE, or PP plastics.
Fluorination for Fragrance Packaging
Like flavor products, most fragrances are also stored in 5-gallon tight-head containers. Since fragrances are often used in products applied to the skin, like cosmetics, perfumes, colognes, and other personal care products, it is crucial to ensure the product stays pure when packaged and stored.
Like flavorings, fragrances are not considered harsh chemicals, but still benefit from being contained in fluorinated plastics. Not only does fluorination prevent fragrances from being absorbed into the plastic and altering their smell, fluorination also helps maintain freshness and potency of fragrance products.
Another product category that benefits from fluorinated containers is essential oils. Essential oils have skyrocketed in popularity in recent years and are often sold individually or as ingredients of another product. Many essential oils, like peppermint oil for example, last much longer in fluorinated containers. Since essential oils can be quite valuable (5 gallons of peppermint oil is worth $50,000!), packaging it in a container that will extend its shelf life is the only logical choice.
Our Fluorination Partner
The best part? You don’t lose any of the core benefits of conventional plastics when using this process – no compromises on recyclability, reduced material costs, reduced weight, or durability.
The Fluoro-Seal Process can be used on almost all plastics and complex parts of any shape or size can be treated, so there’s no need to redesign your current packaging.
We are a Cosmetic Cream Jar manufacturers, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
We’ve talked about fluorination in the past, but here’s a quick reminder: fluorination is the process of adding a chemical barrier to existing Cosmetic Cream Jar manufacturers. The process allows manufacturers to package liquid products in plastic containers that may otherwise negatively react with the chemicals in the products. Fluorination helps to prevent paneling, distortion, and other chemical reactions between the product and container.
WHAT IS FLUORINATION USED FOR?
Fluorination is often used for packaging that contains harsh contents like industrial chemicals, household cleaners, paint thinners, automotive products, and more. However, fluorination is also popular with packaging used to contain milder contents, like flavors and fragrances.
WHY FLUORINATE FLAVOR AND FRAGRANCE PACKAGING?
Although flavors and fragrances are less harsh than other products commonly associated with fluorination, these products require fluorinated containers for many reasons.
Fluorination for Flavor Packaging
Although artificial flavors aren’t considered “harsh chemicals,” it’s still important to keep the flavor away from plastics to avoid having a plastic taste in the finished food item. When a container that is being used to package flavors is fluorinated, it creates a barrier between the plastic and the flavor, helping it keep the flavor from embedding into the plastic or permeating into the plastic materials. Fluorinated packaging also helps the flavor to keep its potency longer in storage.
Most flavor products are stored in 5-gallon tight-head containers or in smaller, 1-gallon plastic containers. These packaging options can easily be fluorinated if they are made with HDPE, LDPE, or PP plastics.
Fluorination for Fragrance Packaging
Like flavor products, most fragrances are also stored in 5-gallon tight-head containers. Since fragrances are often used in products applied to the skin, like cosmetics, perfumes, colognes, and other personal care products, it is crucial to ensure the product stays pure when packaged and stored.
Like flavorings, fragrances are not considered harsh chemicals, but still benefit from being contained in fluorinated plastics. Not only does fluorination prevent fragrances from being absorbed into the plastic and altering their smell, fluorination also helps maintain freshness and potency of fragrance products.
Another product category that benefits from fluorinated containers is essential oils. Essential oils have skyrocketed in popularity in recent years and are often sold individually or as ingredients of another product. Many essential oils, like peppermint oil for example, last much longer in fluorinated containers. Since essential oils can be quite valuable (5 gallons of peppermint oil is worth $50,000!), packaging it in a container that will extend its shelf life is the only logical choice.
Our Fluorination Partner
The best part? You don’t lose any of the core benefits of conventional plastics when using this process – no compromises on recyclability, reduced material costs, reduced weight, or durability.
The Fluoro-Seal Process can be used on almost all plastics and complex parts of any shape or size can be treated, so there’s no need to redesign your current packaging.
We are a Cosmetic Cream Jar manufacturers, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
In this article, we will be discussing some of the different packaging opportunities available to those who make lotions, butters and scrubs. Just like with soap, there are many different options when it comes to PET Cosmetic Bottle manufacturers your cosmetics. Tubes, jars, bottles; the options for customization are nearly limitless! Choosing your shape, size and color wisely is very important, but it is also important to consider factors like duability and shippability, whether the material could be recycled, whether it is sustainably and responsibly sourced, and how you will fill the packages with your product. You must also take into consideration how the product will look with your label on it.
Packaging Materials
Whether you choose tubes, jars or bottles, you will likely have the decision between plastic or glass packaging. Today’s consumers are becoming more and more environmentally aware; for this reason, it’s important to know a few terms that can help you navigate the different materials at your disposal.
HDPE (High-Density Polyethylene)
HDPE is one of the most common materials in cosmetic packaging. It is a very strong material, and is effectively moisture and chemical resistant (although some essential and fragrance oils can cause a collapse of bottle walls). It is rated for exposure to temperatures ranging from -100ºF to 120ºF, making it more resistant to climate-related damages. HDPE is also easily recycled. Companies offer HDPE bottles in many different shapes and sizes, and with a variety of closures to really help you customize your final product.
PET (Polyethylene Terephthalate Plastic)
Much like HDPE, PET is lightweight and relatively durable. Temperature resistance for PET ranges from -40°F to 120°F, which lends resistance to climate damage. Unlike HDPE, which has a cloudy appearance, PET is clear like glass and comes in a wide variety of colors, from cobalt blue and amber to crystal clear. PET is also easy to recycle, making it an environmentally friendly packaging decision.
Glass Packaging
Glass packaging can certainly make an impact on your customers. Of all the possible packaging materials, it is the most inert and will not react with 99% of any products or ingredients. It can be very classy, and is available in a wide variety of sizes, shapes and colors. It is also easy to recycle.
It is important to consider shipping when choosing glass packing options; be sure to find a durable jar or bottle that will have a lower chance of breaking during shipment or if a customer accidentally drops it in the shower or bathroom. Since glass weighs much more than plastic, weight is also a factor both in the cost to ship to the customer and in the cost having the jars or bottles shipped to you.
Custom vs. Stock Packaging
So, you’ve chosen your packaging material-great! Now, you must decide whether you will order customized bottles, tubes or jars, or if you will order stock. What’s the difference?
Custom Packaging
Custom packaging can really help your product to stand out. Silk screening and custom labeling will give you complete control over the entire look of your package-but is it worth it?
There are a few considerations when you are looking at custom packaging. Most companies will require a minimum for a custom order; this number can range anywhere from 20 pieces to 10,000 pieces. If you decide to continue with custom packaging, request a sample if possible so that you can be sure your container is exactly the way you’d like it; after all, you may end up with thousands of them. As an addendum to this potential issue, any changes in your company name, logo or ingredients may mean a complete reorder if you must change the packaging.
Stock Packaging
Stock packaging is an easy way to order, and usually does not require ordering in very large quantities, although as with any materials, the more you order, the less the cost per piece. Stock containers also have a quicker turnaround and shipping time, and can be easier to replace with a different company should your supplier discontinue carrying them. You can still customize a stock container with your own label and logo to really make it yours!
Sustainable Packaging
Let’s talk for a moment about the importance of sustainable packaging. Your customers are looking for a quality product that is also environmentally friendly. There a are a few ways you could accomplish this.
Recyclable Packaging
As we discussed earlier, there are recyclable packaging options such as HDPE, PET, glass, etc. To encourage customers to recycle your products, consider giving them recycling options. Let them know that they can choose to recycle the package themselves, or they are welcome to bring it back to you to turn in when they return for a new product; offering an incentive like a discount on a new product will encourage them both to recycle, and to become repeat customers!
We offer all kinds of cosmetic packaging, such as Lotion Dispenser Pump whloesales, please consult us if you have any questions.https://www.kerrysprayer.com
Packaging Materials
Whether you choose tubes, jars or bottles, you will likely have the decision between plastic or glass packaging. Today’s consumers are becoming more and more environmentally aware; for this reason, it’s important to know a few terms that can help you navigate the different materials at your disposal.
HDPE (High-Density Polyethylene)
HDPE is one of the most common materials in cosmetic packaging. It is a very strong material, and is effectively moisture and chemical resistant (although some essential and fragrance oils can cause a collapse of bottle walls). It is rated for exposure to temperatures ranging from -100ºF to 120ºF, making it more resistant to climate-related damages. HDPE is also easily recycled. Companies offer HDPE bottles in many different shapes and sizes, and with a variety of closures to really help you customize your final product.
PET (Polyethylene Terephthalate Plastic)
Much like HDPE, PET is lightweight and relatively durable. Temperature resistance for PET ranges from -40°F to 120°F, which lends resistance to climate damage. Unlike HDPE, which has a cloudy appearance, PET is clear like glass and comes in a wide variety of colors, from cobalt blue and amber to crystal clear. PET is also easy to recycle, making it an environmentally friendly packaging decision.
Glass Packaging
Glass packaging can certainly make an impact on your customers. Of all the possible packaging materials, it is the most inert and will not react with 99% of any products or ingredients. It can be very classy, and is available in a wide variety of sizes, shapes and colors. It is also easy to recycle.
It is important to consider shipping when choosing glass packing options; be sure to find a durable jar or bottle that will have a lower chance of breaking during shipment or if a customer accidentally drops it in the shower or bathroom. Since glass weighs much more than plastic, weight is also a factor both in the cost to ship to the customer and in the cost having the jars or bottles shipped to you.
Custom vs. Stock Packaging
So, you’ve chosen your packaging material-great! Now, you must decide whether you will order customized bottles, tubes or jars, or if you will order stock. What’s the difference?
Custom Packaging
Custom packaging can really help your product to stand out. Silk screening and custom labeling will give you complete control over the entire look of your package-but is it worth it?
There are a few considerations when you are looking at custom packaging. Most companies will require a minimum for a custom order; this number can range anywhere from 20 pieces to 10,000 pieces. If you decide to continue with custom packaging, request a sample if possible so that you can be sure your container is exactly the way you’d like it; after all, you may end up with thousands of them. As an addendum to this potential issue, any changes in your company name, logo or ingredients may mean a complete reorder if you must change the packaging.
Stock Packaging
Stock packaging is an easy way to order, and usually does not require ordering in very large quantities, although as with any materials, the more you order, the less the cost per piece. Stock containers also have a quicker turnaround and shipping time, and can be easier to replace with a different company should your supplier discontinue carrying them. You can still customize a stock container with your own label and logo to really make it yours!
Sustainable Packaging
Let’s talk for a moment about the importance of sustainable packaging. Your customers are looking for a quality product that is also environmentally friendly. There a are a few ways you could accomplish this.
Recyclable Packaging
As we discussed earlier, there are recyclable packaging options such as HDPE, PET, glass, etc. To encourage customers to recycle your products, consider giving them recycling options. Let them know that they can choose to recycle the package themselves, or they are welcome to bring it back to you to turn in when they return for a new product; offering an incentive like a discount on a new product will encourage them both to recycle, and to become repeat customers!
We offer all kinds of cosmetic packaging, such as Lotion Dispenser Pump whloesales, please consult us if you have any questions.https://www.kerrysprayer.com
If you’re looking for a dispenser that improves the overall user experience of your products, it’s time to consider foamer pumps. Also known as foaming pumps or Foaming Pump Head factory, these dispensers are well known as a solution for hand soap.
The User Experience Benefits of Foamer Pumps
Aerating products offers multiple advantages aside from creating a visually appealing foam for hand soaps, hair care products, and other goods. Foamer pumps offer three keys user experience benefits:
Convenience
Ease of use
Improved product lifespan
Quick convenience
One major advantage of foamer pumps is that they’re one of the easiest dispensers to use. Foamer pumps are designed to create the perfect mix of liquid and air with each use, saving users from having to mix up the solution by hand.
This light, airy foam is also easy to clean off of hands and other surfaces. Whether you manufacture soaps or tabletop cleaner, foams are great for temporary applications and can be quickly and easily removed with a quick rinse or wipe with a wet towel.
Ease of use
Another major perk of foamer pumps is that it eases the application process. As a foam, your product will stick to your applicating surface much more than any liquid can. That level of adhesion can drastically improve your users’ experience when it’s time to apply your product.
For example, if you spray a liquid window cleaner onto a glass pane, that product is going to run as soon as it hits the glass. A sprayable foam will offer much better adhesion, giving users more than a second or two to react after applying your product. A quick foam is also nice and easy to spread evenly across surfaces, whether that’s a glass door or someone’s hair.
Improved product lifespan
Do you know what customers like? More of something. Foamer pumps allow your users to increase how much they get out of your container by limiting their ability to over apply a product.
Each pump of foam uses significantly less product than something dispensed in liquid form. Because of this, foamer pumps can help users feel like they’re getting more bang for their buck. In turn, you get happy customers who feel like your product is a value.
Showcase Your Products with the Perfect Packaging
Foam dispensers can help you showcase why your product is better for your users than the competition. Whether you need foamer pumps or some other packaging solution, it’s important to work with a packaging distributor than can provide you with the right bottles and closures for your cleaning.
We offer all kinds of cosmetic packaging, such as Cosmetic Lotion Pump manufacturers, please consult us if you have any questions.https://www.kerrysprayer.com
The User Experience Benefits of Foamer Pumps
Aerating products offers multiple advantages aside from creating a visually appealing foam for hand soaps, hair care products, and other goods. Foamer pumps offer three keys user experience benefits:
Convenience
Ease of use
Improved product lifespan
Quick convenience
One major advantage of foamer pumps is that they’re one of the easiest dispensers to use. Foamer pumps are designed to create the perfect mix of liquid and air with each use, saving users from having to mix up the solution by hand.
This light, airy foam is also easy to clean off of hands and other surfaces. Whether you manufacture soaps or tabletop cleaner, foams are great for temporary applications and can be quickly and easily removed with a quick rinse or wipe with a wet towel.
Ease of use
Another major perk of foamer pumps is that it eases the application process. As a foam, your product will stick to your applicating surface much more than any liquid can. That level of adhesion can drastically improve your users’ experience when it’s time to apply your product.
For example, if you spray a liquid window cleaner onto a glass pane, that product is going to run as soon as it hits the glass. A sprayable foam will offer much better adhesion, giving users more than a second or two to react after applying your product. A quick foam is also nice and easy to spread evenly across surfaces, whether that’s a glass door or someone’s hair.
Improved product lifespan
Do you know what customers like? More of something. Foamer pumps allow your users to increase how much they get out of your container by limiting their ability to over apply a product.
Each pump of foam uses significantly less product than something dispensed in liquid form. Because of this, foamer pumps can help users feel like they’re getting more bang for their buck. In turn, you get happy customers who feel like your product is a value.
Showcase Your Products with the Perfect Packaging
Foam dispensers can help you showcase why your product is better for your users than the competition. Whether you need foamer pumps or some other packaging solution, it’s important to work with a packaging distributor than can provide you with the right bottles and closures for your cleaning.
We offer all kinds of cosmetic packaging, such as Cosmetic Lotion Pump manufacturers, please consult us if you have any questions.https://www.kerrysprayer.com
How did you get into cosmetic formulation? Did you know that’s what you wanted to do while you were in school, or did you find your passion for it later?
Basically, I got a degree in chemistry and when I finished college I was looking around for any kind of job. I just happened to get a job at a shampoo company and that started me in the Cosmetic Cream Jar manufacturers. It was luck mostly. I didn’t even realize there was a cosmetic industry that hired chemists.
When asked to formulate a new product, what requirements are you given? Are there any common challenges you face when developing something new?
The cosmetic industry is mostly run by the Marketing departments. They work with the Market Research department to figure out what type of products that consumers want. Once that is determined the two groups sit down with the R&D department and work out the details like the type of formula, the color, the fragrance profile, the formula cost, the packaging and some of the feature ingredients. Also, the types of claims they want to make are described too. With that information the cosmetic chemists create products to meet the pre-determined goals. The biggest challenge in developing something new is to keep the formula within the cost constraints of the product. It is extremely difficult to make something that is truly innovative but still in the cost range of the type cosmetic product.
Are there any regulations for skincare products? Does the FDA or similar agencies in other countries have any say in what can and can’t be included in a formula?
Yes, there are regulations in skincare products. The regulations state that it is illegal to sell an unsafe cosmetic. If companies are selling unsafe products they are breaking the law and their products can be recalled & the company can be fined or even shut down. In the US, the FDA regulates cosmetics. Around the world there are other agencies that regulate cosmetics and each country is a little different. As a formulator you have to understand the regulations of wherever your product is going to be sold and formulate accordingly.
What are some of the methods used for product testing? Are they tested for efficacy as well as safety?
There are a number of things that are done for testing products. First, there are quality control tests. The products are tested to ensure they meet pre-determined specifications such as the color, odor, thickness, appearance, etc. Cosmetic companies strive to make consistent, high quality products and testing on both finished products and raw materials has to be done frequently.
To ensure that products are safe and will remain safe, stability testing is done. This type of testing exposes the product to different temperature and lighting conditions to see how well it maintains its quality over time. Products are not sold if they can not pass stability testing. This testing also involves microbial testing which ensures that the products will not get contaminated over time. Bacterial contamination in cosmetic products is easy and can spread disease. This is why a preservative is extremely important in producing a safe cosmetic.
Finally, if the product is using new to the world raw materials some countries require animal testing to be done. The EU recently banned animal testing of cosmetics but it is still done for products made in the US and China. Note that the vast majority of cosmetics are not tested on animals because they use raw materials that have already been safety tested. It’s only products that use brand new raw materials that get tested. Another type of safety testing that is done is on human volunteers. These are typically patch tests and sensitization testing for which the volunteers are paid.
In addition to these tests, performance tests are done to ensure that the cosmetic product meets the functions and claims of the product. This is really product specific. For example, when Fructis claims their hair products make hair 5 or 10 times stronger they have to conduct a test which proves this is true. It is illegal to lie in your advertising about cosmetics.
Mineral oil has really been getting slammed these past few years. I see many people claiming it causes cancer because it’s a petroleum product, and others who say it’s no good because it “doesn’t provide any real skincare benefits.” Is there any truth to these criticisms?
We are a Trigger Sprayer Factory, offer all kinds of cosmetic packaging, please consult us if you have any questions. https://www.kerrysprayer.com
Basically, I got a degree in chemistry and when I finished college I was looking around for any kind of job. I just happened to get a job at a shampoo company and that started me in the Cosmetic Cream Jar manufacturers. It was luck mostly. I didn’t even realize there was a cosmetic industry that hired chemists.
When asked to formulate a new product, what requirements are you given? Are there any common challenges you face when developing something new?
The cosmetic industry is mostly run by the Marketing departments. They work with the Market Research department to figure out what type of products that consumers want. Once that is determined the two groups sit down with the R&D department and work out the details like the type of formula, the color, the fragrance profile, the formula cost, the packaging and some of the feature ingredients. Also, the types of claims they want to make are described too. With that information the cosmetic chemists create products to meet the pre-determined goals. The biggest challenge in developing something new is to keep the formula within the cost constraints of the product. It is extremely difficult to make something that is truly innovative but still in the cost range of the type cosmetic product.
Are there any regulations for skincare products? Does the FDA or similar agencies in other countries have any say in what can and can’t be included in a formula?
Yes, there are regulations in skincare products. The regulations state that it is illegal to sell an unsafe cosmetic. If companies are selling unsafe products they are breaking the law and their products can be recalled & the company can be fined or even shut down. In the US, the FDA regulates cosmetics. Around the world there are other agencies that regulate cosmetics and each country is a little different. As a formulator you have to understand the regulations of wherever your product is going to be sold and formulate accordingly.
What are some of the methods used for product testing? Are they tested for efficacy as well as safety?
There are a number of things that are done for testing products. First, there are quality control tests. The products are tested to ensure they meet pre-determined specifications such as the color, odor, thickness, appearance, etc. Cosmetic companies strive to make consistent, high quality products and testing on both finished products and raw materials has to be done frequently.
To ensure that products are safe and will remain safe, stability testing is done. This type of testing exposes the product to different temperature and lighting conditions to see how well it maintains its quality over time. Products are not sold if they can not pass stability testing. This testing also involves microbial testing which ensures that the products will not get contaminated over time. Bacterial contamination in cosmetic products is easy and can spread disease. This is why a preservative is extremely important in producing a safe cosmetic.
Finally, if the product is using new to the world raw materials some countries require animal testing to be done. The EU recently banned animal testing of cosmetics but it is still done for products made in the US and China. Note that the vast majority of cosmetics are not tested on animals because they use raw materials that have already been safety tested. It’s only products that use brand new raw materials that get tested. Another type of safety testing that is done is on human volunteers. These are typically patch tests and sensitization testing for which the volunteers are paid.
In addition to these tests, performance tests are done to ensure that the cosmetic product meets the functions and claims of the product. This is really product specific. For example, when Fructis claims their hair products make hair 5 or 10 times stronger they have to conduct a test which proves this is true. It is illegal to lie in your advertising about cosmetics.
Mineral oil has really been getting slammed these past few years. I see many people claiming it causes cancer because it’s a petroleum product, and others who say it’s no good because it “doesn’t provide any real skincare benefits.” Is there any truth to these criticisms?
We are a Trigger Sprayer Factory, offer all kinds of cosmetic packaging, please consult us if you have any questions. https://www.kerrysprayer.com
Unlike a wedding, most couples moving into a new home don’t sign up for a registry with a pre-approved list of gifts to choose from when you attend their housewarming gathering.
Therefore, it’s up to you to figure out what the couple needs, what they would appreciate, what would best match their home, what would appropriately demonstrate you’re thinking about them… or all of the above! This is no small challenge.
In fact, did you know there’s even some very specific house warming guidelines you should be following? For example, most experts don’t advise simply gifting the couple cash, no matter how appealing it might sound to let them choose a gift for themselves!
So, how do you find the perfect Mini Trigger Sprayer suppliers -- something thoughtful and useful that the couple won’t find themselves wanting to regift a few months down the road?
Good news: we have a few suggestions.
Why Personalized Gifts Make the Best Gifts
When you’re struggling to find a housewarming gift for the couple who already has everything or you’re just not sure what they might need, the answer is something truly unique.
If you give a gift that absolutely no one else has, you can be sure you’re not giving a gift they already have or won’t need -- and you’re definitely winning the “most thoughtful gift” award.
The best way to give a gift that no one else has is to buy a gift that’s personalized. You can take something as simple as a glass soap bottle and turn it into a beautiful, personalized gift that stands out in any home.
A personalized gift truly demonstrates love and care because it shows that you put specific thought into what the couple would enjoy or appreciate. Something personalized sends a completely different message than buying something mass produced that everyone else has!
And what better way to begin the couple’s journey in their new home than by decorating it with something that was made especially for them?
Sprucing Up Their New Kitchen or Bathroom With Personalized Soap Dispensers
Too often when we move into a new home, we find ourselves running out to our nearest store for a few of the essentials we completely forgot we would need right away: soap, toilet paper, cleaning supplies, that sort of thing.
Suddenly, you find yourself with tons of generic items that don’t necessarily match your decor, but were an in-the-moment necessity, so you settled for that disposable bottle of dish soap for the kitchen or foaming hand soap for the bathroom.
You can save the new couple this hassle with the perfect housewarming gift: reusable glass pump dispensers -- a gift that’s not only functional, but super stylish.
Personalized Glass Pump Dispensers
These personalized glass pump dispenser mean you can add a personal touch to a household item that’s traditionally boring. You can personalize the bottles from start to finish, choosing the color, material, and even adding your own text to the label.
Keep the couple’s tastes and decor in mind! For those with a more minimalist style, you might choose a clear bottle with a simple black pump. For someone who prefers a bit of a rustic feel in their home, check out the amber colored bottles with a beautiful brushed metal pump.
And, of course, adding personalized text to the label means giving a truly unique gift! Adding the couple’s last name to the label can make their whole home feel like it was designed just for them!
Monogrammed Glass Soap Bottles
For those who prefer a more subtle or minimalist style, you might try a monogrammed glass soap bottle that lets you effortlessly add their initials to the label. Upon first glance, guests might not even recognize these soap bottles are personalized, adding a subtle, but elegant touch to any kitchen or bathroom!
We offer all kinds of cosmetic packaging, such as Foaming Pump Head factory, please consult us if you have any questions.https://www.kerrysprayer.com
Therefore, it’s up to you to figure out what the couple needs, what they would appreciate, what would best match their home, what would appropriately demonstrate you’re thinking about them… or all of the above! This is no small challenge.
In fact, did you know there’s even some very specific house warming guidelines you should be following? For example, most experts don’t advise simply gifting the couple cash, no matter how appealing it might sound to let them choose a gift for themselves!
So, how do you find the perfect Mini Trigger Sprayer suppliers -- something thoughtful and useful that the couple won’t find themselves wanting to regift a few months down the road?
Good news: we have a few suggestions.
Why Personalized Gifts Make the Best Gifts
When you’re struggling to find a housewarming gift for the couple who already has everything or you’re just not sure what they might need, the answer is something truly unique.
If you give a gift that absolutely no one else has, you can be sure you’re not giving a gift they already have or won’t need -- and you’re definitely winning the “most thoughtful gift” award.
The best way to give a gift that no one else has is to buy a gift that’s personalized. You can take something as simple as a glass soap bottle and turn it into a beautiful, personalized gift that stands out in any home.
A personalized gift truly demonstrates love and care because it shows that you put specific thought into what the couple would enjoy or appreciate. Something personalized sends a completely different message than buying something mass produced that everyone else has!
And what better way to begin the couple’s journey in their new home than by decorating it with something that was made especially for them?
Sprucing Up Their New Kitchen or Bathroom With Personalized Soap Dispensers
Too often when we move into a new home, we find ourselves running out to our nearest store for a few of the essentials we completely forgot we would need right away: soap, toilet paper, cleaning supplies, that sort of thing.
Suddenly, you find yourself with tons of generic items that don’t necessarily match your decor, but were an in-the-moment necessity, so you settled for that disposable bottle of dish soap for the kitchen or foaming hand soap for the bathroom.
You can save the new couple this hassle with the perfect housewarming gift: reusable glass pump dispensers -- a gift that’s not only functional, but super stylish.
Personalized Glass Pump Dispensers
These personalized glass pump dispenser mean you can add a personal touch to a household item that’s traditionally boring. You can personalize the bottles from start to finish, choosing the color, material, and even adding your own text to the label.
Keep the couple’s tastes and decor in mind! For those with a more minimalist style, you might choose a clear bottle with a simple black pump. For someone who prefers a bit of a rustic feel in their home, check out the amber colored bottles with a beautiful brushed metal pump.
And, of course, adding personalized text to the label means giving a truly unique gift! Adding the couple’s last name to the label can make their whole home feel like it was designed just for them!
Monogrammed Glass Soap Bottles
For those who prefer a more subtle or minimalist style, you might try a monogrammed glass soap bottle that lets you effortlessly add their initials to the label. Upon first glance, guests might not even recognize these soap bottles are personalized, adding a subtle, but elegant touch to any kitchen or bathroom!
We offer all kinds of cosmetic packaging, such as Foaming Pump Head factory, please consult us if you have any questions.https://www.kerrysprayer.com
Finding a reliable, professional, and customer-friendly Cosmetic Cream Jar manufacturers manufacturer online is probably more difficult that finding the right home to live. Google or YouTube may offer you some information in this regard, but believe it or not most of the services are excessively hyped and cannot offer you professionally viable services. For instance, maintenance of hygiene is one of the most important aspects that have to be considered while packaging cosmetics. However, this is not everyone’s cup of tea and only a well-trained and experienced packaging firm can help you get world-class level of services. So, how can you find the right cosmetic packaging manufacturer? There are certain rules and guidelines that you need to remember while searching for cosmetic containers wholesale supplier and packaging experts. These guidelines will lead you to the best packaging supplier in China. So, without wasting any more time, let’s check out the salient characteristics of professional cosmetic packaging suppliers.
1. Manufacture-ability
Versatility is the hallmark of any professional cosmetic packaging manufacturer and supplier. It must be noted that with the emergence of new technologies in the packaging industry there is an abundance of resources required for the supplier to stay ahead of the competitors. So, manufacturability is one of the key characteristics of the supplier, which basically implies that the scale of services is diverse, extensive, and all-inclusive. There are four important aspects that have to be assessed when selecting cosmetic containers wholesale supplier in China.
QC (Quality Control): This refers to maintaining proper hygiene and ethics at the workplace so as to offer excellent level of packaging and supplies to the customer. Cosmetics are very fragile items and can be affected even by the fluctuation of temperatures at the warehouse or packaging facility. Therefore, you need to make sure that the cosmetic packaging supplier you have selected is capable of maintaining industry’s best quality standards at every stage of packaging to delivering.
Customer Service: Offering friendly, accommodative, and responsive customer service is another important feature of a professional cosmetic packaging supplier. Contract-based suppliers are usually more inclined on making customer feel at-ease and forming a long-term business relationship. However, those having good reputation in the market are often more reliable.
Industry experience: Industry experience matters a lot. Novice firms may not be as fully aware of the trade ethics, principles, and packaging requirements. Moreover, not all suppliers would offer you the same quality of services as they may not be as well-equipped or have an experienced team than some of the older ones. Therefore, always check the time a supplier has spent in the market and the experience they can offer you.
2. Design capability
Design capability refers to the range of designing services that a cosmetic packaging manufacturer can offer. This includes helping the customer design customized boxes for their products, include lipstick tubes, mascara containers, lotion bottle etc. An ideal cosmetic container wholesale supplier team should have a dedicated designing department so that customer can get their logos printed on their boxes. Furthermore, packaging suppliers must be able to offer wide range of services such as designing the packing boxes according to the demands of the client and mold making, which is a key requirement for packing cosmetics.
We are a Plastic Press Cap for sale, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
1. Manufacture-ability
Versatility is the hallmark of any professional cosmetic packaging manufacturer and supplier. It must be noted that with the emergence of new technologies in the packaging industry there is an abundance of resources required for the supplier to stay ahead of the competitors. So, manufacturability is one of the key characteristics of the supplier, which basically implies that the scale of services is diverse, extensive, and all-inclusive. There are four important aspects that have to be assessed when selecting cosmetic containers wholesale supplier in China.
QC (Quality Control): This refers to maintaining proper hygiene and ethics at the workplace so as to offer excellent level of packaging and supplies to the customer. Cosmetics are very fragile items and can be affected even by the fluctuation of temperatures at the warehouse or packaging facility. Therefore, you need to make sure that the cosmetic packaging supplier you have selected is capable of maintaining industry’s best quality standards at every stage of packaging to delivering.
Customer Service: Offering friendly, accommodative, and responsive customer service is another important feature of a professional cosmetic packaging supplier. Contract-based suppliers are usually more inclined on making customer feel at-ease and forming a long-term business relationship. However, those having good reputation in the market are often more reliable.
Industry experience: Industry experience matters a lot. Novice firms may not be as fully aware of the trade ethics, principles, and packaging requirements. Moreover, not all suppliers would offer you the same quality of services as they may not be as well-equipped or have an experienced team than some of the older ones. Therefore, always check the time a supplier has spent in the market and the experience they can offer you.
2. Design capability
Design capability refers to the range of designing services that a cosmetic packaging manufacturer can offer. This includes helping the customer design customized boxes for their products, include lipstick tubes, mascara containers, lotion bottle etc. An ideal cosmetic container wholesale supplier team should have a dedicated designing department so that customer can get their logos printed on their boxes. Furthermore, packaging suppliers must be able to offer wide range of services such as designing the packing boxes according to the demands of the client and mold making, which is a key requirement for packing cosmetics.
We are a Plastic Press Cap for sale, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
Do you know how to fix a foam soap dispenser when it does not work? Keep reading this article, you will know the exact operation procedures.
1: Unscrew the cap from the Lotion Dispenser Pump whloesales and remove the dispenser pump assembly. Wipe off the dispenser tube with a paper towel, then immerse the entire assembly, including the pump and the tubes, in warm water. Leave it for 5 minutes. The water dissolves congealed soap. If the pump wasn’t dispensing soap, this procedure may fix the issue. If the spring is broken, this procedure cleans the pump and makes it easier to disassemble.
2: If your soap dispenser still isn’t working, you may need to do a little more work. Unscrew the pump reservoir from the spout if you can. Inexpensive pumps that come on shampoo and soap bottles are often fused and don’t come apart. Separate the reservoir from the spout and remove the spring. Replace the spring with an identical one.
3: You can also replace the dispenser tube if it’s too short or it’s kinked. You can usually pull it off of the reservoir tube. You should be able to find a replacement at a hardware store, in the section for plastic tubing. Reassemble the pump and clean it out by pumping hot water through it. Screw it back onto the soap container once you’re sure all clogs have dissolved.
4: If none of these procedures fix your pump, it’s probably because the internal seals are compromised. If so, don’t bother trying to repair it. Even if you could, it’s easier and more reliable to just get a new pump.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump for sale, please consult us if you have any questions.https://www.kerrysprayer.com
1: Unscrew the cap from the Lotion Dispenser Pump whloesales and remove the dispenser pump assembly. Wipe off the dispenser tube with a paper towel, then immerse the entire assembly, including the pump and the tubes, in warm water. Leave it for 5 minutes. The water dissolves congealed soap. If the pump wasn’t dispensing soap, this procedure may fix the issue. If the spring is broken, this procedure cleans the pump and makes it easier to disassemble.
2: If your soap dispenser still isn’t working, you may need to do a little more work. Unscrew the pump reservoir from the spout if you can. Inexpensive pumps that come on shampoo and soap bottles are often fused and don’t come apart. Separate the reservoir from the spout and remove the spring. Replace the spring with an identical one.
3: You can also replace the dispenser tube if it’s too short or it’s kinked. You can usually pull it off of the reservoir tube. You should be able to find a replacement at a hardware store, in the section for plastic tubing. Reassemble the pump and clean it out by pumping hot water through it. Screw it back onto the soap container once you’re sure all clogs have dissolved.
4: If none of these procedures fix your pump, it’s probably because the internal seals are compromised. If so, don’t bother trying to repair it. Even if you could, it’s easier and more reliable to just get a new pump.
We offer all kinds of cosmetic packaging, such as Fine Mist Sprayer Pump for sale, please consult us if you have any questions.https://www.kerrysprayer.com
While buying and using cosmetic products, we often see different type of packaging methods followed by different production lines. But have you ever considered that the variety of packaging materials can also have the significant amount of influences over the actual product itself?
There is also another fact that is seen that the different type of product in terms on application also has the fixed tradition of packaging. Such as you are most likely to see nail polish bottles be of glass. Or fairness creams, face wash packaging tubes are made of plastic. And even in some other cases there is seen of the usage of metal containers in such type of Cosmetic Cream Jar manufacturers. This article is all about the facts and information about what are the actual use of these different type of packaging material and why are they used in such manner? And all the advantages and disadvantages behind the usage of these materials.
Since the development of proper technology that helps to have the massive and low-cost production of plastic, it has been one of the most used material ever in the history of mankind for the daily purpose objects. Modern devices, packaging, framing, designing everything is basically done with plastic mostly till the date. And the same goes for the fact of cosmetic packaging also. The type of the product and also the manufacturing process heavily relies on the type of the material that is used for packaging of it.
There are some certain amount of products which you can not just basically think of being with any other type of packaging rather than the use of plastic. For instance, every cream-like product is either coming to you with the packaging with plastic tube or bottle or jar depending on the total quantity of the product inside. Suppose that you are using any face washing product. The tubing with plastic helps you easily squeeze out the proper amount of product that is needed for the application. Or the big amount of facial cream or any type of face treatment cream which you need of a rather more amount in terms of application, comes in a jar or wide bottle for the ease of getting the product out of the container and also save some effort that is actually meaningless.
Pros
All the reason behind the massive usage of plastic for packaging is that the significantly lower cost than any other material available. Plus the flexibility in terms of usage also helps the cause a lot. Also another reason is that the pleasant look of the material that help it becoming even more attractive in terms of packaging. It is light-weight and also durable in comparison to other materials. Also this has the ability of being recycled into many other type of things.
Cons
The main problem behind using plastic is that after the usage of the actual product inside, the packaging material turns into nothing but a waste and also has a heavy impact over the environmental condition of the planet. Also, resistance to certain type chemicals also limit the usage of it being used up to a state.
We are a Trigger Sprayer Factory, offer all kinds of cosmetic packaging, please consult us if you have any questions. https://www.kerrysprayer.com
There is also another fact that is seen that the different type of product in terms on application also has the fixed tradition of packaging. Such as you are most likely to see nail polish bottles be of glass. Or fairness creams, face wash packaging tubes are made of plastic. And even in some other cases there is seen of the usage of metal containers in such type of Cosmetic Cream Jar manufacturers. This article is all about the facts and information about what are the actual use of these different type of packaging material and why are they used in such manner? And all the advantages and disadvantages behind the usage of these materials.
Since the development of proper technology that helps to have the massive and low-cost production of plastic, it has been one of the most used material ever in the history of mankind for the daily purpose objects. Modern devices, packaging, framing, designing everything is basically done with plastic mostly till the date. And the same goes for the fact of cosmetic packaging also. The type of the product and also the manufacturing process heavily relies on the type of the material that is used for packaging of it.
There are some certain amount of products which you can not just basically think of being with any other type of packaging rather than the use of plastic. For instance, every cream-like product is either coming to you with the packaging with plastic tube or bottle or jar depending on the total quantity of the product inside. Suppose that you are using any face washing product. The tubing with plastic helps you easily squeeze out the proper amount of product that is needed for the application. Or the big amount of facial cream or any type of face treatment cream which you need of a rather more amount in terms of application, comes in a jar or wide bottle for the ease of getting the product out of the container and also save some effort that is actually meaningless.
Pros
All the reason behind the massive usage of plastic for packaging is that the significantly lower cost than any other material available. Plus the flexibility in terms of usage also helps the cause a lot. Also another reason is that the pleasant look of the material that help it becoming even more attractive in terms of packaging. It is light-weight and also durable in comparison to other materials. Also this has the ability of being recycled into many other type of things.
Cons
The main problem behind using plastic is that after the usage of the actual product inside, the packaging material turns into nothing but a waste and also has a heavy impact over the environmental condition of the planet. Also, resistance to certain type chemicals also limit the usage of it being used up to a state.
We are a Trigger Sprayer Factory, offer all kinds of cosmetic packaging, please consult us if you have any questions. https://www.kerrysprayer.com
The Soap Dispensers Are Easy To Use
2021年5月26日 Soap dispensers allow you to have liquid soap available to wash your hands with. Liquid soap is dispersed when you push down on the top of the dispenser, and this is much more hygienic than picking up a bar of soap that has been handled by previous dirty hands.
The soap dispensers are easy to use, they are decorative, and they allow children to get measured amounts of soap so they save you time, and often they save you money.
From time to time you need to clean your soap dispenser. Cleaning the unit stops it from becoming clogged by hardened amounts of the soap you keep in it. Cleaning also sanitizes the device and removes any germs or bacteria that might be lurking on the exterior portion.
Taking a Soap Dispenser Apart
To properly clean a soap dispenser, or to troubleshoot one you are going to need to take the dispenser apart.
First:
Disable the dispenser by unscrewing the pump part. Some dispensers have Lotion Dispenser Pump whloesales that simply screw onto the container and others are held in place by a small screw.
Second:
Pull the nozzle out of the container bottle. The nozzle on the less expensive units is likely to be attached to the pump head.
Third:
You need to have some strength to pull the ring off of the dispenser. Soap has gathered up around the ring. It is a sticky mess. You will likely need to hold the unit with one hand and use a cloth over your hand to keep the ring from slipping as you try to work it free.
Fourth:
To release the middle portion of the dispenser just keep tugging at it and wiggling it until it comes apart.
Be careful because at the bottom of the soap container there is going to be a ball bearing. That ball bearing plays a vital role in making the device function properly. Do NOT lose the ball bearing.
Cleaning the Pump Components
You are going to need to soak the pump components in order to soften that soap that is on them. You can add a tablespoon of bleach to your water in order to sanitize the unit.
Soak the pieces and occasionally check them to see if the goop on them has softened enough to be wiped away with a soft cloth. This could take a long time, depending on the soap you used, and how long the soap has been in the dispenser.
Once the dispenser has been cleaned, and rinsed, you need to reassemble it.
First:
Make sure that ball bearing is in the bottom section of the holding container.
Second:
Put the middle section back in place, line it up properly, and twist to make the components go together.
Go ahead and put some liquid soap in your dispenser.
Third:
Put the ring that held the nozzle down in the soap over the nozzle at one end, and then slide both components onto the holding unit.
Fourth:
Put the nozzle back into the end of the pump. Try to depress the pump and make soap come out.
This will require you to pump the head of the pump several times so soap can be transferred out of the holder and into the nozzle straw. Then it has to be worked up through the straw so it can be released by the head of the pump.
Be patient it will happen.
Final Thoughts
If you have inexpensive soap dispensers that either came with the liquid soap already in them, or cost less than three dollars, you are probably better off throwing the old dispenser away and buying a new one. These less expensive units are actually designed to be discarded and not to be refilled or reused for a long period of time.
If one of the inexpensive units needs cleaning before it is empty you can hold the device under warm running tap water to soften build-up. Keep rinsing and wiping at the unit with a soft cloth until all of the old soap is removed.
You can keep your dispenser functioning properly by wiping it down and keeping the excess soap wiped away from the pump-head.
We offer all kinds of cosmetic packaging, such as PET Cosmetic Bottle manufacturers, please consult us if you have any questions.https://www.kerrysprayer.com
The soap dispensers are easy to use, they are decorative, and they allow children to get measured amounts of soap so they save you time, and often they save you money.
From time to time you need to clean your soap dispenser. Cleaning the unit stops it from becoming clogged by hardened amounts of the soap you keep in it. Cleaning also sanitizes the device and removes any germs or bacteria that might be lurking on the exterior portion.
Taking a Soap Dispenser Apart
To properly clean a soap dispenser, or to troubleshoot one you are going to need to take the dispenser apart.
First:
Disable the dispenser by unscrewing the pump part. Some dispensers have Lotion Dispenser Pump whloesales that simply screw onto the container and others are held in place by a small screw.
Second:
Pull the nozzle out of the container bottle. The nozzle on the less expensive units is likely to be attached to the pump head.
Third:
You need to have some strength to pull the ring off of the dispenser. Soap has gathered up around the ring. It is a sticky mess. You will likely need to hold the unit with one hand and use a cloth over your hand to keep the ring from slipping as you try to work it free.
Fourth:
To release the middle portion of the dispenser just keep tugging at it and wiggling it until it comes apart.
Be careful because at the bottom of the soap container there is going to be a ball bearing. That ball bearing plays a vital role in making the device function properly. Do NOT lose the ball bearing.
Cleaning the Pump Components
You are going to need to soak the pump components in order to soften that soap that is on them. You can add a tablespoon of bleach to your water in order to sanitize the unit.
Soak the pieces and occasionally check them to see if the goop on them has softened enough to be wiped away with a soft cloth. This could take a long time, depending on the soap you used, and how long the soap has been in the dispenser.
Once the dispenser has been cleaned, and rinsed, you need to reassemble it.
First:
Make sure that ball bearing is in the bottom section of the holding container.
Second:
Put the middle section back in place, line it up properly, and twist to make the components go together.
Go ahead and put some liquid soap in your dispenser.
Third:
Put the ring that held the nozzle down in the soap over the nozzle at one end, and then slide both components onto the holding unit.
Fourth:
Put the nozzle back into the end of the pump. Try to depress the pump and make soap come out.
This will require you to pump the head of the pump several times so soap can be transferred out of the holder and into the nozzle straw. Then it has to be worked up through the straw so it can be released by the head of the pump.
Be patient it will happen.
Final Thoughts
If you have inexpensive soap dispensers that either came with the liquid soap already in them, or cost less than three dollars, you are probably better off throwing the old dispenser away and buying a new one. These less expensive units are actually designed to be discarded and not to be refilled or reused for a long period of time.
If one of the inexpensive units needs cleaning before it is empty you can hold the device under warm running tap water to soften build-up. Keep rinsing and wiping at the unit with a soft cloth until all of the old soap is removed.
You can keep your dispenser functioning properly by wiping it down and keeping the excess soap wiped away from the pump-head.
We offer all kinds of cosmetic packaging, such as PET Cosmetic Bottle manufacturers, please consult us if you have any questions.https://www.kerrysprayer.com
The Decoration Of Cosmetic Cream Jar
2021年5月19日 Our topic today is a PET Cosmetic Cream Jar manufacturers container, you may think there is not too much to say about a common cosmetic PET jar, well we get same thought like you, so this is different with regular PET jars we usually used, normally the PET jars were made by 2 steps: injection and blowing process, but this one was made by injection only, it is a thickwall & glass-like cosmetic jar, when you have this jar on hand, maybe you will say this is a PETG cream jar, you are right! That is the point! Actually the appearance and touch is very close to PETG jar, but comparing the price, this jar is much better.
If you are looking for a cosmetic jar container to pack mineral makeup foundation, eye cream, facial cream, body butter etc, you wish the jar is plastic material but heavy like glass, and not high price, we must say “ just take this jar, this is the best packaging second to none for you.
Application:
Moisturizer | Night Cream | Firming Cream | Skin Essence | Facial Musk | Eye Cream | Mineral Makeup Foundation …
Decoration:
customized color | frosting | printing & hotstamping & label | metalization for lid.
So let’s talk about features of this thick wall PET jar:
Transparency: thickwall PET jar with high transparency like glass cosmetic containers;
Safe: PET jar is lightweight and unbreakable, more safe convenient for transportation and use;
Multi-color: comparing with glass cosmetic containers, the PET jar can be made with much more colors for selection.
We won’t miss the most important is the feature of “Recyclable”
Another feature of PET container is we can put it to the recycle sorting directly, comparing with glass cosmetic containers, the PET container is better for our environment and with visual sense of high quality, this PET jar container is ideal packaging solutions for cosmetics & skincare, as well as best for pharmaceutical products.
We are a Plastic Press Cap for sale, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
If you are looking for a cosmetic jar container to pack mineral makeup foundation, eye cream, facial cream, body butter etc, you wish the jar is plastic material but heavy like glass, and not high price, we must say “ just take this jar, this is the best packaging second to none for you.
Application:
Moisturizer | Night Cream | Firming Cream | Skin Essence | Facial Musk | Eye Cream | Mineral Makeup Foundation …
Decoration:
customized color | frosting | printing & hotstamping & label | metalization for lid.
So let’s talk about features of this thick wall PET jar:
Transparency: thickwall PET jar with high transparency like glass cosmetic containers;
Safe: PET jar is lightweight and unbreakable, more safe convenient for transportation and use;
Multi-color: comparing with glass cosmetic containers, the PET jar can be made with much more colors for selection.
We won’t miss the most important is the feature of “Recyclable”
Another feature of PET container is we can put it to the recycle sorting directly, comparing with glass cosmetic containers, the PET container is better for our environment and with visual sense of high quality, this PET jar container is ideal packaging solutions for cosmetics & skincare, as well as best for pharmaceutical products.
We are a Plastic Press Cap for sale, offer all kinds of cosmetic packaging, please consult us if you have any questions.https://www.kerrysprayer.com
1 2
